Endosulfan

Material Safety Data Sheet of Endosulfan Technical

NAME ENDOSULFAN

Chemical Name ENDOSULFAN TECH

------------------------------------------------------------------------------------

PROPERTIES

Mol Weight . 406.95               IGN.Temp                     Tan Coloured Soild Having
Boling Point -                        Vapour Pressure
                                             @25 C-0.00001mm/hg    Slight Specific Odour
Melting Point - 70 C to 100C
SP.GR-@ 20 C 1.745
REF.Index           -
Flash Point          -

------------------------------------------------------------------------------------

TOXICITY HANDLING & STORAGE

LD50 110 mg/kg (Rats).
TWA 0.1 mg/M3(Skin).
Store in dry well ventilated place away from food stuffs, animal foods and away from children do not touch the material with bare hands.
Use Goggles, Boots, Approns, Air Mask, Gloves and other Protective clothings.

------------------------------------------------------------------------------------

EMERGENCY TREATMENT HYGIENIC PRECAUTION

Do not eat, drink or smoke with contaminated hands stay unwind. Do not breath, dust or spray. Avoid skin/eye contact. Keep personal cleanliness.

------------------------------------------------------------------------------------

SYMPTOMS

Headache, Nausea, Vomiting, Diarrhoea, Dizziness, Ner Vouseness, Convulsion May also occur in severe cases. Contact with material may irritate or burn the skin, eyes and mucous memberanes.

------------------------------------------------------------------------------------

FIRST AID

Inhalation:- Move the victim to fresh air & Note the vital signs start artifical breathing, If not breathing and call for a doctor immediately.
Body Contact:- Remove the contaminated clothings take the victim to fresh air. Wash exposed areas with water and soap, for three times at least.
Ingestion:-Note the vital signs & provide artifical respiration if required, imediately take the victim to doctor.

------------------------------------------------------------------------------------

SPILLS AND LEAKAGE

Handle the spill or leakage if without risk. Stay upwind, do not tough spilled material absorb the material in sand of likewise other noncumbustible material and place it in a container for further disposal. In case of large spills, like the area far ahead to contain further spreading.

------------------------------------------------------------------------------------

FIRST PRECAUTION

Material itself does not burn or burn with difficulty use water in floody quantities as fog, alcohol foam, CO2, DCP etc. Fight the fire with care, use PPBA container may explode in heat of fire & run off from fire control. Water may release irritating or poisonous cases.

------------------------------------------------------------------------------------

ADDITIONAL INFORMATION

IMDG CLASS : 6.1, MFAG : 500, IMDG PAGE : 6221, EM : 6:1 - 04, U.N.NO 2761

------------------------------------------------------------------------------------

NOTE

The information given herein is in good faith and belief in its accuracy, but does not imply the acceptance of any legal llability or responsibility whatsoever by the company.